• A fully customisable design to suit most character's needs


• Fully machined and re-useable brass joints


• Easily replace worn out wires


• Threaded tie-down system


• Magnetic tie-down system

Buy 4 kits and we'll send a 5th absolutley free!!

Item description:

The stop motion modular kit contains all you need to build your very own animation armature ready to flesh out in clay/sponge or fabric - with no need for gluing or soldering.

The great thing about Armature FX is that it is completely customisable to suit your own specifications. All you have to do is twist the aluminium armature wire provided and cut the lengths appropriate to the size of the limbs you would like your character to have. With the socket design armature joints, you can just plug in the aluminium wire and tighten with the grub screws provided - it's that easy! Kits are modular and allow different sections to be replaced. So if your puppets arm should break, just unscrew the part and replace it with some fresh wire. This kit's biggest advantage is that it comes with steel feet and very powerful super magnets so you can magnetise your puppet to a set top or use the M5 bolts for a secure tie-down. This is such a valuable tool when animating unsupported walk/run cycles and standing. In the kit you get over 3 meters of 1.5mm aluminium armature wire, enough to build quite a few armatures or replacement parts. We are also throwing in 2 x 6mm white acrylic eye balls for you to decorate with pupils as you wish.

Contents:

3 meters approx 1.5mm aluminium animation wire

2 x Armature FX breast/hip joint (4 way brass)

2 x Armature FX feet (steel with brass boss)

1 x Armature FX head block (3 way brass)

2 x Armature FX super animation magnets

2 x Armature FX acrylic eyes

1 x Armature FX diagram

10 x Grubs screws 

2 x M5 tie-down bolts

2 x M5 washers

2 x M5 Wing nuts 

Please note the picture is for illustration purposes only. Kit does not come with brass K&S section (the brass tubing used as bones on the arms, legs and back vertebrae in the illustration).  

• A fully customisable design to suit most creature's needs
• Fully machined and re-useable brass joints
• Easily replace worn out wires
• Threaded tie-down system
• Magnetic tie-down system

Item description:

After many requests we have finally got around to producing a kit for a generic 4 legged creature. The only difference between this kit and the humanoid is that you get 2 extra feet (making a total of 4 feet) but at a discounted cost.

The great thing about Armature FX is that it is completely customisable to suit your own specifications. All you have to do is twist the aluminium armature wire provided and cut the lengths appropriate to the size of the limbs you would like your creature to have. With the socket design armature joints, you can just plug in the aluminium wire and tighten with the grub screws provided - it's that easy! Kits are modular and allow different sections to be replaced. So if your puppets arm should break, just unscrew the part and replace it with some fresh wire. This kit's biggest advantage is that it comes with steel feet and very powerful super magnets so you can magnetise your puppet to a set top or use the M5 bolts for a secure tie-down. This is such a valuable tool when animating unsupported walk/run cycles and standing. In the kit you get over 3 meters of 1.5mm aluminium armature wire, enough to build quite a few armatures or replacement parts. We are also throwing in 2 x 6mm white acrylic eye balls for you to decorate with pupils as you wish.

Contents:

3 meters approx 1.5mm aluminium animation wire

2 x Armature FX breast/hip joint (4 way brass)

4 x Armature FX feet (steel with brass boss)

1 x Armature FX head block (3 way brass)

2 x Armature FX super animation magnets

2 x Armature FX acrylic eyes

1 x Armature FX diagram

12 x Grubs screws 

2 x M5 tie-down bolts

2 x M5 washers

2 x M5 Wing nuts 

For any stop motion enthusiast just looking for steel feet and tie downs then this kit is for you. Aluminium wire armatures can be secured into the brass ankle of the feet with the grub screws provided. The steel foot plates have an M5 thread through the toe perfect for tying armatures down to set.

Contents:

2 x Armature FX feet (steel with brass boss)

2 x Grubs screws 

2 x M5 tie-down bolts

2 x M5 washers

2 x M5 Wing nuts